Klik LCM’s (Lighting Control Module) enable the control of an area with up to 4 different control groups. Each group of outputs can control standard switched and/ or digital dimmable (DALI/ DSI) luminaires. The control module can be connected to up to 4 SELV occupancy sensors and up to 4 wall switch overrides (double retractive, centre off).
Any switch or occupancy sensor can be assigned to any output. The programming is carried out with iPad and communicates with the LCM via Bluetooth.
- SELV Switching / Dimming
Each channel is capable of being switched via one of 4 or more switch inputs. - Sensor with integral lux sensor (SELV)
This allows daylight dimming and switching utilising any natural light available. - Scene setting
4 lighting scenes are possible (plus global Up/Down-On/Off) controlled via centre-off 2 pole retractive grid switch modules and 2 separate scene profiles are available. - Partition switch
This allows total and separate control of a room with a partition and switch fitted. - Corridor hold
Linking LCMs with RJ45 lead to hold designated corridor. - Presence & absence sensing
Each output channel can be set to Presence or Absence individually. - Light level offset between channels
This function allows phasing channels to set as a percentage of the lead channel. (E.g. 10%, 60%, 80%, 100%). - Three level timeout
At timeout, lighting can turn Off or Dim down in three stages. - Dimming – DSI, DALI (Broadcast)
Broadcast on the required channel to all connected luminaire.
T: +353 (0)1 883 5844
E: customer.service@hager.ie
www.hager.ie